Publicité
Les langues disponibles
Les langues disponibles
Instruction FH-CWD Thermostat
9. Technical Specifications
Feature
Approval
Colour
Dimensions
Adjustment mode
Programmable
Fault indication/
failure mode
Frost protection
Ambient
temperature
Precision
Hysteresis
IP class
Produced by Danfoss Floor Heating Hydronics 05.2011
Description
CE Marking, EN 60730
White RAL 9016
86 x 99 x 19mm
Push buttons
No
If room sensor failure, E1
will be displayed. If floor
sensor failor, E2 will be
displayed. In any case,
thermostat will turn off all
output of relays.
Yes, if enabled:
< 5 °C heating on
> 7 °C heating off
- 10 °C – 60 °C
±1 °C
1 °C, symmetrical around
the setpoint temperature
30
11
VI.CU.B2.2D
Publicité
