Publicité
Les langues disponibles
Les langues disponibles
"18°C": Indicates the temperature in the surrounding environment.
Usage
•
Connect the power adapter to the 5V USB socket.
•
After emitting a "beep" sound, the detector will start the countdown for
180 seconds, the time required to prime the sensor.
•
In the normal monitoring state, press the "Test" key. The detector will
emit a "beep-beep-beep" tone and transmit a wireless alarm signal to the
alarm system with which you want to pair it.
•
After completing the pairing, the detector enters the normal operating
state.
Disabling the audible alarm: In the alarm state, press the "Test" button on the
device to turn off the audible alarm. The LED light continues to blink.
Detector testing: In the normal operating state, press the "Test" button. The
detector will send an alarm signal to the alarm system with which it is paired.
Detector pairing: access the menu for adding detectors in the alarm system,
switch the alarm system to pairing mode and press the "Test" button on the
gas detector to send a wireless signal to the alarm system. Check the pairing
confirmation message on the alarm system. Test the operation of the detector.
In case of alarm
Note: paint, cosmetics, alcohol and other chemicals can trigger an alarm. To
avoid false alarms, do not use such products near the gas detector.
In case of alarm, proceed as follows:
● Turn off all gas sources (stoves, stoves, gas water heaters, etc.)
● Open the doors and windows immediately.
● Do not switch on other electrical appliances or lights.
● Turn off the main gas supply and contact the gas company to check and fix
the problem.
3
Publicité
