AMQ Kinex Guide D'installation page 22

Phase 1 | Hardware, Components & Optional Accessories
Hardware
M6*10
x 22
Components
Column (left & right)
x 2 sets (3-Stage, 2-Stage
or Fixed Column)
Cantilever set
(left & right) 2 sets
Beam Bottom
Cover x 2
Optional
DR Power
Pole Adapter
M6*8 x 2
These drawings identify the parts included with your Height Adjustable Table. Some of these parts are considered by regulatory bodies
to be critical components. If any parts shown here do not match your order, please contact AMQ at cc@amqsolutions.com
Kinex Installation Guide | 22
M10*22 ST3*20
x 4 x 4
DR Beam (48", 60"or 72")
Cross beam & cover set
x 2 sets (either for 24"D
or 30"D)
Bridge Glide x 4
Connector
Kinex Gallery End Panel
Panel Bracket (for 24"
or 30")
ST5*16 x 5
ST5*20 M6*12
x 36 x 16
Stretcher Frame
x 2 sets
Standard
Handset x 2
Not including the above electricals for fixed height
NOTE:
Kinex (using fixed columns)
Electrical Outlet
Cover x 4
LED Handset
with 4 presets
ST4*20 x 2
Kinex Double Run
M6*10 Allen Keys
x 8
(16 screws already
pre-mounted)
Worksurface
(48", 60"or 72" in width
23" or 29" in depth)
Power Cord Connector
x 2 Cables
(6 pins) x 2
Cross Beam Beam Screen
Side Cover x 2 Clip Hole
Cover x 2
Screen Clip
x 2
M6*10 x 4
amqsolutions.com