Télécharger Imprimer la page

PR electronics PReasy 4131 Mode D'emploi page 16

Masquer les pouces Voir aussi pour PReasy 4131:

Publicité

Les langues disponibles

Les langues disponibles

Should there be any doubt as to the correct handling of the module, please
contact your local distributor or, alternatively,
PR electronics A/S, Lerbakken 10, DK-8410 Rønde, Denmark,
tel: +45 86 37 26 77.
Mounting and connection of the module should comply with national legislation
for mounting of electric materials, i.a. wire cross section, protective fuse, and
location. Descriptions of input / output and supply connections are shown in the
block diagram and side label.
The following apply to fixed hazardous voltages-connected modules:
The max. size of the protective fuse is 10 A and, together with a power
switch, it should be easily accessible and close to the module. The
power switch should be marked with a label indicating that it will switch
off the volt age to the module.
CALIBRATION AND ADJUSTMENT:
During calibration and adjustment, the measuring and connection of external
voltages must be carried out according to the specifications of this manual. The
technician must use tools and instruments that are safe to use.
NORMAL OPERATION:
Operators are only allowed to adjust and operate modules that are safely fixed
in panels, etc., thus avoiding the danger of personal injury and damage. This
means there is no electrical shock hazard, and the module is easily accessible.
CLEANING:
When disconnected, the module may be cleaned with a cloth moistened with
distilled water or ethyl alcohol.
LIABILITY:
To the extent that the instructions in this manual are not strictly observed, the
custom er cannot advance a demand against PR electronics A/S that would
otherwise exist according to the concluded sales agreement.
28
28
All manuals and user guides at all-guides.com
As manufacturer
hereby declares that the following product:
is in conformity with the following directives and standards:
The EMC Directive 2004/108/EC and later amendments
This declaration is issued in compliance with article 10, subclause 1 of the EMC
directive. For specification of the acceptable EMC performance level, refer to
the electrical specifications for the module.
The Low Voltage Directive 73/23/EEC and later amendments
Rønde, 29 June 2005
DECLARATION OF CONFORMITY
PR electronics A/S
Lerbakken 10
DK-8410 Rønde
Type: 4131
Name: Universal trip amplifier
EN 61326
EN 61010-1
Peter Rasmussen
Manufacturer's signature
29
29

Publicité

loading

Ce manuel est également adapté pour:

4131v100-in