Publicité
Les langues disponibles
Les langues disponibles
• Switch off the appliance before each cleaning and maintenance
and disconnect it from the mains supply.
•
Turn all switches to the „off" position.
•
Wait until the appliance has cooled down to the point where it is
only warm and not hot, as this makes cleaning the appliance
easier.
•
Clean the surface with a damp cloth, a soft brush, or a fine sponge
and then rub dry. In case of heavy soiling, you can use hot water
and a non-abrasive detergent to clean the unit.
•
Do not use aggressive or abrasive detergents or sharp metal
scrapers to clean the glass in the oven door as they may scratch the
surface and damage the glass.
•
Do not leave acidic substances (lemon juice, vinegar) on stainless
steel parts.
•
Do not use steam cleaners to clean the appliance. The baking trays
and grilles can be cleaned with a mild detergent.
Replacing the lamp
To replace the lamp, follow these steps:
1. Unplug the appliance from the wall outlet.
2. Loosen the lamp cover by turning it counterclockwise (it could be
very tight)
3. Remove the bulb and replace it with a new bulb of the same type.
4. Reattach the lamp cover.
Important note on the slide-in modules
• To ensure that the oven can be used safely, it is essential that the
grilles and baking trays are placed correctly.
• The grilles and the baking tray may only be used between the first
and the fifth level.
• The grilles and baking trays should be pushed into the oven the right
way round, as this ensures that they are removed carefully and that
hot food cannot slip out.
EN-15
Publicité
