General Warnings - Bimar DEU311.EU Mode D'emploi

Fax +32 030 9904733
General Information
Thank you for purchasing our Bimar dehumidifier type DEU311.EU.
The air always contains a certain amount of water in the form of vapour. This vapour determines the
degree of humidity of an environment. As the temperature increases, so does the capacity of the air
to hold water vapour. That's why as soon as the temperature decreases in homes, the air releases the
water vapour contained in it, which then settles in the form of condensation on all the cold surfaces
such as windows, walls, etc.
The dehumidifier works by removing part of the moisture from the air and prevents (e.g.
mold) caused by condensation. Experts have determined that the ideal conditions for our health and
for the home are obtained between 40% and 60% relative humidity.
CAUTION!
T
symbol invites you to read these instructions carefully before using the
his
device, and also inform third parties of them, if necessary. Store this booklet for
future reference and for the entire lifetime of the device. If any parts of these
instructions prove difficult to understand or if in doubt, contact the company at
the address written on the last page before using the product.
T
his symbol highlights instructions and warnings for safe use.
T
his symbol indicates not to touch the device with wet hands.
T
his symbol indicates prohibition.
T
his symbol: indicates that the device is Class II.

GENERAL WARNINGS

• T
his device is designed for domestic use only (not professional), solely for air treatment in
domestic environments, to dehumidify in order to reduce the percentage of relative humidity, in the
manner provided in this manual. This device is designed to be operated in the home with doors,
windows and other external openings closed, in rooms used as a kitchen, laundry room (or similar
area), bathroom, etc.... or for areas with excessive moisture, the device can also be used in the
basement to prevent moisture damage or where books or valuables are stored. The device is
designed to operate at a temperature between 5 °C and 35 °C. It should not be used for commercial
or industrial applications. The manufacturer cannot be held responsible for any damages caused by
improper, incorrect or irresponsible use and/or by repairs done by an unqualified person.
11
Assembly page 11/50
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Bimar
(Italy). The pages must be reproduced and folded in
order to obtain a booklet A5 (+/- 148.5 mm width x 210
mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't
change the page numbering. Keep the language
integrity.