Samsung 3 Serie Mode D'emploi page 33

Input cables (Sold separately)
❑
HDMI
Installing the Stand
¦
Preset: Place the stand onto the Guide Stand and fasten it
N
using the screws.
1. Attach your LCD TV to the stand.
Two or more people should carry the TV.
N
Make sure to distinguish between the front and back of
N
the stand when attaching it.
To make sure the TV is installed on the stand at a proper
N
level, do not apply excess downward pressure to the
upper left of right sides of the TV.
2. Fasten two screws at position 1 and then fasten two screws
at position 2.
Stand the product up and fasten the screws. If you fasten
N
the screws with the LCD TV placed down, it may lean to
one side.
Disconnecting the Stand
¦
1. Remove screws from the back of the TV.
2. Separate the stand from the TV.
Two or more people should carry the TV.
N
. Cover the bottom hole with the cover.
[350-Canada]BN68-01975V-00L02.in31 31
HDMI-DVI Component
English - 1
Composite(AV) Coaxial (RF) VGA
2009-09-22 ¿ÀÈÄ 4:58:42