Publicité
STEP 1
Begin by setting the frame inside
the cabinet. Locate the position
of where you would like it to be
mounted.
Note: Look to make sure that
there is no interference with
the cabinet door when opening
and closing.
STEP 2
With the frame in the closed
position, insert the front (2) #8 x
3/4"screws, making sure that the
frame is square to the front of the
cabinet. Then install the (2) #8 x
3/4"rear screws (See Figure A).
#2
#2
#2
STEP 3
With the frame securely in place,
slide the frame out of the cabinet
and remove the (2) pre-installed
screws on the rear of the frame.
The rear basket can be installed
using these (2) screws
(See Figure B).
Note: For 16" depth or shorter
applications, the rear basket can
be left off .
#2
#2
#2
2
FIG. A
FIG. B
Customer Service: 800-626-1126 | rev-a-shelf.com
Publicité
