Rev-A-Shelf RV Serie Instructions D'installation

If you have any questions or would like additional information
on the rest of our prod ucts for the kitchen, closet, or
bathroom, please contact a Customer Service Specialist at:
1-800-626-1126 or visit us on the web at www.rev-a-shelf.com.
Also, don't forget about our door mount kit (RV-DMKIT)
that will attach your current cabinet door to your RV Waste
Container or Hamper.
1
Your RV series has been shipped fully assembled for ease
of installation.
• First Remove the container(s) from the wire frame.
• Place the frame inside of your cabinet.
• Look to make sure that there is plenty of clearance to
shut the door and for the waste container.
2
With the frame in a closed position, insert the front two
screws, making sure that the framework is square to the
front of the cabinet.
3
If there is suffi cient clearance, install rear screws.
If framework prevents access to rear screws, remove
framework by pulling out and lifting frame from slides.
Note: if your product features full extension slides
remove frame by disengaging release triggers (Fig. A).
Finally, place your waste container in the wire frame and the
installation is complete.
I-RV-05
©2005 Rev•A•Shelf, Inc. • 2409 Plantside Drive • Jeffersontown, KY 40299 • 1-800-626-1126 • FAX 502-491-2215
Installation Instructions for:
RV-Series
Pull-Out Waste Containers and Hampers
www.cabinetparts.com
1
2
3
FIGURE A