schmersal RSS 36-D-R-ST Instructions Pour Fonctionnement Et Montage page 9

Remarque (indicateurs d'état à LED)
Affectation des broches
Broche 1
Broche 2
Broche 3
Broche 4
Broche 5
Broche 6
Broche 7
Broche 8
Remarque UL
Max. environmental temperature 69 °C.
]
FCC/IC - Remarque
This device complies with Part 15 of the FCC Rules and contains licence-exempt transmitter/receivers that are
compliant with ISED (Innovation, Science and Economic Development) Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference signals, and
(2) This device must be able to tolerate interference signals. These also include interference signals that could
cause the device to function improperly.
This device complies with the nerve stimulation limits (ISED SPR-002) when operated at a minimum distance of 100
mm. Changes or modifications not expressly approved by K.A. Schmersal GmbH & Co. KG could void the user's
authority to operate the equipment.
The licence-free transmitter/receiver contained in this device satisfies the requirements of the "Radio Standards
Specification" of the Innovation, Science and Economic Development Canada (ISED) authority that apply to licence-
free radio equipment. Operation is permissible under the following two conditions:
(1) The device must not create disturbances.
(2) The device must tolerate received radio frequency interference, even if this could impair its functionality.
This device complies with the nerve stimulation limits (ISED CNR-102) when operated at a minimum distance of 100
mm.
In the event of changes or modifications that have not been expressly approved by K.A. Schmersal GmbH & Co. KG,
the user's authorisation to use the device may become ineffective.
Este equipamento nao tem direito àprotecao contra interferência prejudicial e nao pode causar interferencia em
sistemas devidamente autorizados.
Para maiores informacores consultar: www.gov.br/anatel
4 Montage
LED jaune: état de fonctionnement
LED verte: tension d'alimentation
LED rouge: défaut
1A1 Ue: (1)
X1 Entrée de sécurité 1
A2 GND bleu
Y1 Sortie de sécurité 1 Noir
OUT Sortie diagnostic "OUT" OUT gris
X2 Entrée de sécurité 2 Violet
Y2 Sortie de sécurité 2 rouge
IN sans fonction Rose