jaz WITCHER 20 Mode D'emploi page 4

UK
USER MANUAL
Description of the buttons and connectors:
1. Continuous pressure to increase the volume, one click for the next
song.
2. Play – Pause.
3. Change audio source (Wireless, TF card, USB key, AUX).
4. Change lights or stop them.
5. On/off button.
6. Continuous pressure to decrease the volume, one click for the
previous song.
7. Audio output via 3.5mm cable.
8. USB memory input
9. TF card memory slot.
10. Type-C charging socket
Instructions for use:
Turning on and pairing:
Press the ON/OFF button (5) until a confirmation sound is heard.
Search in the Bluetooth® settings of the telephone for "JAZ WITCHER
20". The speaker will automatically turn off after 15 minutes if not
connected to any device.
Shutdown:
Press the ON/OFF button (5) until a confirmation sound is heard.
Play or pause audio:
Press the Play/Pause button (2) to play or pause a song.
Volume adjustment:
To increase the volume, press and hold + (1).
To decrease the volume press and hold - (6).
Next/previous song:
Press the + key (1) once to advance.
Press the - button (6) once to repeat.
Alternative playback modes:
USB key: insert a key with your favourite songs saved on it into the
USB slot (8).
Micro-SD memory: insert a card with your favourite songs saved on it
into the micro-SD slot (9).
Aux: connect an external player using a 3.5mm mini-jack cable (7).
Charging the speaker:
Insert the included cable into the Type-C socket (10) and connect it to
a suitable USB charger.
The LED will light up red and go off when charging is complete.
4