Lenz Digital plus 23200 Mode D'emploi page 29

24
All manuals and user guides at all-guides.com
With XPA you can:
•
control and call on 9999 digital locomotives. The address 0 is used to control
one conventional locomotive in the digital power circuit
•
switch 8 functions in locomotive decoders.
•
control multiple tractions which were assembled with a different XpressNet
device.
•
switch 1024 points and signals.
•
carry out device settings.
The XPA can be connected to the following components of the Digital
system: LZ100; SET02; SET03; compact
The operation of the XPA requires the software version 3 of the Digital plus
system.
The XPA cannot be used with devices which use an older software version. If
applicable, check whether updates are available for your devices.
compact
compact compact
Digital plus plus by by Lenz Lenz ® ® ® ®
Digital Digital plus plus by by Lenz Lenz