Lenz Digital plus 23200 Mode D'emploi page 41

34
All manuals and user guides at all-guides.com
50 - 60
99
If a setting has been successfully changed, you will hear a short sequence of tones.
Afterwards, the version number will be indicated by low tones as follows:
1 low tone = version 1, 2 low tones = version 2, etc.
If the system could not be set successfully, you will hear a short, low tone. In this
case, separate the XPA briefly from the XpressNet and the connected phone. Try the
setting again.
stopped, voltage on the track remains switched on)
11 different times for the period of a temporary function
from approx. 0.2 to 2 sec.
Resetting the XPA to ex-works settings:
XpressNet address:
Default locomotive address:
Setting key "0":
Time for temporary function:
1
3
Emergency stop
50