Publicité
Les langues disponibles
Les langues disponibles
Connections
Speaker Components
(L) (R)
FRONT
STAND
(L)
(R)
STAND BASE SUBWOOFER
SURROUND
Installing the Speakers on the Tallboy Stand
1.
Turn the Stand Base upside-down and connect it to
the Stand.
2.
Insert small screws (4x20, For connecting Stand &
Stand Base) clockwise into the four holes marked
using a screwdriver as shown in the illustration.
!
CAUTION
When you use a torque screwdriver, be careful not
to put excessive force. Otherwise, it runs idle or
can be damaged. (torque screwdriver- below 15
kg.f.cm)
3.
Connect the upper Speaker to the assembled
Stand.
4.
Insert another large screw (5x15, For connecting
Speaker & Stand) clockwise into the hole on the rear
of the speaker using a screwdriver.
5.
This is the appearance after the speaker is installed.
Follow this steps to install other speaker.
20
English
HT-D6530_XAC_0302.indd 20
HT-D6530_XAC_0302.indd 20
All manuals and user guides at all-guides.com
Assembled Speakers
SCREW (5X15): 2EA
SCREW (4X20): 8EA
CENTRE
SPEAKER
CABLE
1
3
5
CENTRE SPEAKER
SURROUND
FRONT
SPEAKER
SPEAKER
2
Stand
Base
Stand
4
Speaker
Stand
SUBWOOFER
2011-03-02 ¿ÀÈÄ 2:27:49
2011-03-02 ¿ÀÈÄ 2:27:49
Publicité
