EN
Connect to Yeelight App
This product can be controlled on Yeelight App and be configured to interact with other Yeelight products.
Download App
Search for "Yeelight" in an App store or scan the QR code on the right to
download and install the App.
Add Device
・ Go to the Yeelight App homepage, and click "+" in the upper right corner
to add your device.
・ Proceed with the configuration as instructed on the App.
・ Once you've added a device successfully, you can find it in the device list.
Note: The operation procedure may differ from what's described here due to App updates. Please proceed
as instructed on the App.
This product can also be controlled on Mi home, Google Home App, and Amazon Alexa. You can
download and install one of these Apps from an App store, and configure your device as instructed on the
App. After you have finished the configuration, you can use the App to control the light.
Restore to factory settings
Use the wall switch to turn the ceiling light on and off five times consecutively (turn off the ceiling light
and wait for two seconds, then turn it on and wait for two seconds, this counts as one time). The ceiling
light then starts breathing and automatically restarts afer five seconds, and the factory setings of the
ceiling light have been restored.
Note: When using the ceiling light in a new network environment, you need to restore the factory
setings and connect to the network again.
4