Nuvo IRON SLP03 Instructions D'installation page 4

WARNING
To avoid injuries, burns or electric shocks:
• Keep children away from the battery and the accessories
• Insert the battery according to the polarity marked on the battery
• Do not mix old batteries with new ones
• Do not use batteries different from those of this product
• Do not set the batteries on fire
• Do not use damaged batteries
• Do not use frozen batteries
• Do not immerse the product in liquid
• Do not expose the product to excessive heat or an open flame
• Recycle or discard the battery according to local and national regulations
ASSEMBLY
1. Twist counterclockwise to remove the top cover (A)
from the housing (B).
2. Turn the switch to the "ON" position (FOR FIRST
TIME USE ONLY).
3. Firmly slide the pole (C) into the housing (B).
4. Attach the pole (C) to the stake (D).
5. Drive the assembled light firmly into the ground. If
the soil is too hard, dig a hole in the ground with a
tool first to avoid damaging the stake.
·
nuvoiron.com 1.866.955.0355
Decorative Glass Solar Pathway Lights
·
info@nuvoiron.com
#NuvoIron for a chance to be featured on our social media pages!
INSTALLATION INSTRUCTIONS
A
B
C
D
@nuvoironfencing @nuvoiron
SLP03
@nuvoiron @nuvoiron