VEVOR EV-A30-EU007A Notice D'utilisation page 20

c. Click Add to add the device, enter the WIFI pairing interface,
automatically identify the WIFI name of the phone.Click Next, and the
device will be automatically bound. After the binding is successful, a
message will be displayed indicating that the device has been successfully
added. Finally, click the icon of "Finish" and wait about 5 seconds for the
device to be bound.
d. You can also click "+" in the upper right corner of the APP to manually
add the device, select the category of "Energy saving" in the left column,
pull up the device type, find the device "Car charging pile (Bluetooth
+WIFI)", click to enter, and then click "Confirm indicator flashing" and "Fast
flashing" as prompted. Enter the WIFI password (WIFI password
connected to the mobile phone) and click Next to match the password, and
always set the bound device as prompted. After binding the device, charge
it according to the APP interface.
Note: The APP can set charging current, reserve charging time and other
functions; You can also query the real-time charging status. APP controls
the charging function, which is not limited by the charging mode of the
device.
INSTRUCTIONS FOR CHARGING DISPLAY
4.0 Instructions for charging display (non-touch screen)
(EV-A30-EU007A/EV-A30-EU011A).
4.1 Enter the standby state after power-on. Standby screen:
- 18 -