Télécharger Imprimer la page

Nicols LED BAR 163 FC Manuel D'utilisation page 10

Publicité

Les langues disponibles

Les langues disponibles

light in the synchronization.
When on "Slave2 Mode", this light work with the master light in the synchronization in some
time ,sometimes ,will work the opposite direct of the master light .this is a special
master/slave effect .
When "Master Mode" as master light, through DMX signal with other light setup as "Slave1
Mode" or "Slave2 Mode", they will be running the same effect program ,the same direction or
opposite direction.
3.5.SHOW Mode
When on "Show Mode", press enter button enter next menu, press UP or DOWN button
select "Sound", "Color", "Fade" these three built-in program
- When on "Sound" mode, this light will be accept the sound signal ,follow the music
running the different effect .If there is no music signal ,the light will be auto run ,once
there is sound signal ,the light will be work follow the music rhythm to work .
- When on "Color" mode; press enter, the light will be run in single color jumping .
- When on "Fade", press enter button you can select the speed of fade .There are total 9
kinds of speed for your choose.
3.5.BLACK LCD Mode
When show "Black LCD", press enter button enter the menu "LCDLight Off, "LCDLight On",
can choose the turn on /off LCD.
3.6.WHITE BALANCE Mode
When show "White Balance", press enter button enter the menu of setting up color, through
UP or DOWN button, the user can select the brightness of one section color. The menu :
"Red-1 Balance" 、 "Green-1 Balance" 、 "Blue-1 Balance" 、 "Red-2 Balance" 、 "Green-2
Balance"、 "Blue-2 Balance"、 "Red-3 Balance"、 "Green-3 Balance"、 "Blue-3 Balance"、 "Red-4
Balance"、"Green-4 Balance"、"Blue-4 Balance". On the menu press enter button, enter the
menu can adjust the brightness of single color 0-255.
3.7.AUTO TEST Mode
When show "Auto Test", press enter button the system has: red / green / blue/ white, there
are 4 kinds of single color jumping.
9-

Publicité

loading