Kask Zenith Mode D'emploi page 2

US
DANGER! intended use of this helmet involves activities that are extremely
dangerous. FAILURE TO HEED AND FOLLOW THESE INSTRUCTIONS AND
ANY OF THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR EVEN
DEATH.
WARNING: Carefully read and understand these instructions. Use this helmet
exclusively or the activities or which it is certied (see Labeling) and in strict
accordance with ANSI Z89.1, CSA Z94.1 and all applicable OSHA regulations.
The helmet is Type 1 Class E
WARNING: improper use of this helmet can cause serious or fatal injury. lf the
instructions are not ollowed correctly, the level o protection oered by the
helmet can be signicantly reduced. Inspect the helmet beore each use ar any
signs o visible damage. DO NOT USE HELMET IF THERE IS ANY SUSPICION
OF ITS CONDITION OR AFTER A MAJOR IMPACT.
WARNING: It is mandatory that the user becomes knowledgeable about
all eatures o the helmet, its capabilities and limitations, and gets specic
instructions and/or training rom a competent and responsible person in the
proper use of the helmet.
WARNING: USERS OF THE HELMET ARE FULLY RESPONSIBLE FOR THEIR
ACTIONS AND ASSUME ALL RISKS FOR THEIR DECISIONS. KASK S.p.A.,
its aliates, subsidiaries, importers, distributors and dealers will accept no
responsibility in the event o an accident leading to injury or even death and
shall not be liable or any injury, death, loss, or damage resulting rom improper
use of this helmet.
NOTE: Activities involving the use of this equipment are inherently dangerous.
You are responsible or your own actions and decisions. Beore using this
equipment, you must:
- read and understand all instructions for use;
- get specic training in its proper use;
- become acquainted with its capabilities and limitations;
- Understand and accept the risks involved.
Failure to heed any of these warnings may result in severe injury or death. The
manuacturer and/or distributor will accept no responsibility in the event o
accidents leading to injury or even death due to improper use of the helmet. This
helmet is constructed to absorb impact by partially distributing the shock or by
damaging its essential components. Activities at height present a risk o serious
head injury. Wearing a helmet can signicantly reduce this risk, but cannot
entirely eliminate it. This helmet should be used exclusively or the activities or
which it is certied (see labeling). This helmet has been approved or industrial
head protection.
2