Publicité
Les langues disponibles
Les langues disponibles
- Read all the instructions before using this tool. All operators must be fully trained in its use
and be aware of these safety rules.
- Do not exceed the maximum working air pressure of 90 p.s.i./6.2 bar.
- Use personal safety equipment.
- Use only compressed air at the recommended conditions.
- If the tool appears to malfuncti on, remove from use immediately and arrange for service and
repair.
- If the tool is used with a balancer or other support device, ensure that it is fixed securely. .
- Always keep hands away from the working attachment fitted to the tool.
- The tool is not electrically insulated. Never use the tool if there is any chance of it coming into
contact with live electricity.
- When using the tool, always adopt a firm footing and/ or position and grip the tool firmly to be
able to counteract any forces or reaction forces that may be generated whilst using the tool.
- Use only correct spare parts. Do not improvise or make temporary repairs.
- Do not lock tape, wire, etc. the on/off valve in the run position. The trigger/lever etc. must
always be free to return to the 'off' position when it is released.
- Always shut off the air supply to the tool, and depress the trigger/lever etc. to exhaust air from
PNEUMATIC HAMMER
Read this instruction manual carefully before installing, operating or
servicing the product described.
Please save these instructions.
Always wear safety ear protection
Always wear safety eye guard.
Always wear safety mask.
Do Not Use Oxygen or Reactive Gases as this may causes an
Do Not Exceed Air Pressure of 90 PSI/ 6.2 bar.
SECURITY INSTRUCTIONS
explosion.
ENGLISH
7
Publicité
