Publicité
Les langues disponibles
Les langues disponibles
SERVICE AND MAINTENANCE
It is strongly recommended that a regular service programme for all air powered tooling be adopted and
managed, as reqularly maintained air tools ensure a long life cycle, optimal power and reduced operating
expenses. Repairs of air tools should be carried out by trained specialists and authorized service
dealers. For this reason, we strictly advise against attempting to repair without this support. Pour a liberal
amount of air tool oil in air inlet. If tool remains jammed, it should be serviced by an authorized service
Center. If operation cannot be restored, tool should be checked by the manufacturer.
LIMITED WARRANTY
The tools are warranted to be free from defects in material and workmanship for one year from the date
of purchase.
The warranty shall not apply to the following cases:
1) Normally wearable parts such as bearings, rotor blades, etc.
2) Consumables such as sanding pads, filters, etc.
3) Misuse, neglect in maintaining tool / machine or tool / machine modification.
4) Lack of lubrication or evidence of rust, dirt or corrosion.
5) Tools / Machines being used after they are badly worn such as using ratchet with worn yoke.
6) The users do not comply with our manual.
Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not
covered by Warranty.
10
Publicité
