Setting Up And Connecting The Device; Overview Of Functions; Use - gourmetmaxx LY-0204A-AC/DC Mode D'emploi

EN

Setting Up and Connecting the Device

1. Fully unwind the appropriate connecting cable (1, 2).
2. Set up the device with a clear space at the sides and clear space above it (at least
30 cm) on a fl at, solid, heat-resistant and hard-wearing surface.
3. Plug the connecting plug for the chosen connecting cable into the appropriate con-
necting socket on the back of the device:
Connecting cable with mains plug
Connecting cable with the car adapter
4. Plug the mains plug or car adapter into a properly installed plug socket or cigarette
lighter. PLEASE NOTE! The On / Off switch (14) should be in the OFF position during
connection.

Overview of Functions

The device has two different modes: keep-warm mode and cooling mode. Move the
On / Off switch (14) to the position you want to choose between the modes.
Position
OFF
HOT
COLD

Use

PLEASE NOTE!
■ Before switching from one mode to another, the device must be switched off and you
must wait for at least 5 minutes!
• When you fi rst use the device, it can take up to 12 hours for the device to
get to the optimum temperature. The more frequently the device is used, the
faster the device will reach its target temperature.
• To preserve the car battery, do not operate the device via the cigarette lighter
when the car's engine is off.
• We recommend that food, cans or bottles which are to be cooled are pre-
chilled before they are laid down or placed in the device.
1. Connect the device (see the "Setting Up and Connecting the Device" chapter).
2. Move the On / Off switch (14) to the HOT or COLD position to switch on the device
in the mode you want. The corresponding control lamp goes out (see the "Overview
of Functions" chapter).
18
►
►
Function
Device is switched off
Device is in keep-warm
mode (approx. 50°C)
Device is in cooling mode
(approx. 20°C below ambi-
ent temperature)
220 V connecting socket (12)
12 V connecting socket (13)
Control lamp
Both control lamps
switched off
Keep-warm control lamp is
lit up red
Cooling control lamp is lit
up green