Safety Stop - Blomberg MKL 5460 X Instructions D'installation

The lock button for this device (block)
Using the "lock" button, complete control can be blocked (device), to prevent accidental actions.
If you do not de-activate the lock button before switching off the control, it will still be activated
when the control is switched on again.
It is not possible to activate other buttons before de-activating the lock button. The only button that
can be activated is the start button.
If one or more cooking zones accidentally stay on without control, after a certain time the control
card is automatically switched off (see table).
Operating time limit
Power level
in hours
1-2 6
3-4 5
5 4
6-9 1.5
Using the TouchLite control, it is possible, depending on model type, to control hotplates with a
double or triple circuit.
When a radiant multiple hotplate is activated, all circuits start at the same time. If you wish to
switch on the innermost circuit only, the outer circuits can be switched off using the appropriate
button.
If the multiple-circuit button is activated, the outermost circuits of the activated cooking zone can
be deactivated at any moment. An activated outer circuit has a special supplementary indicator
light. Activating the multiple-circuit button again, activates the outer circuits again and the relevant
indicator lights light up.
All manuals and user guides at all-guides.com

Safety stop

Multiple circuit stop
8