Specifications; Dimensions - Honeywell TrueDRY DH65 Guide D'installation

Specifications

Install TrueDRY DH65 according to National Electric Codes.
Dry-Bulb Wet-Bulb
Temp Temp
80°F 70°F
70°F 61°F
60°F 52°F
Home Size Dehumidifier Capacity Required to Maintain Desired Indoor RH*
(square ft)
60% RH Indoor (pints/day) 50% RH Indoor (pints/day) 40% RH Indoor (pints/day)
2080
2600
3120
* Based on extreme climates where outdoor humidity is 70-90% RH. For less extreme climates, larger homes can be
adequately served with less capacity. Actual requirements may vary.

Dimensions:

11-5/8
(295)
8 INCH (203)
11-1/2
DIAMETER
(292)
Product weight: 55 lbs
Shipping weight: 65 lbs
Shipping dimensions: 16 in. H x 15 in. W x 31 in. L
Media Filter: MERV 11, 9 in. H x 11 in. W x 1 in. D
Drain connection: 3/4-in. threaded female NPT
connection, with attached 3/4-in. male connection.
Duct connections: 8-in. round inlet and outlet. ABS
plastic, compatible for connection to rigid or
flexible ducting with sheet metal screws and/or
tape.
Cabinet: 20 gauge galvanized steel powder-coat
painted.
Insulation: R value 1
Compressor: Rotary-style
Refrigerant: R22, 1.0 oz.
Operating Temp Range (outside cabinet):
56ºF-95ºF (13ºC-35ºC)
Operating Humidity Range: 0-99% RH
69-2089EFS_D.indd 3
Intake Capacity
Humidity (Pints/Day)
60% RH 65
60% RH 42
60% RH 21
49–54
61–68
75–82
27 (686)
21 (533)
M27329
55–58
65–72
79–86
Airflow versus external static pressure
(0–1 in. water pressure) with collars attached
0 in.
0.2 in.
0.4 in.
0.6 in.
Input ratings
• Electrical input voltage: 120VAC, 60 Hz nominal
• Input current: 5.5 amps
Output ratings
• Power transformer to R/C terminals: 24VAC,
0.85A
• Energy Performance: 2.02 liters per kilowatt hour
(KWH)
Standards and approval body requirements
ETL Tested per standard UL 474 ducted dehumidifier.
3
TrueDRY DH65
71–78
90–97
95–110
160 CFM
140 CFM
120 CFM
100 CFM
69-2089EFS—07
9/22/2008 9:54:12 AM