Fujitsu Siemens Computers SCALEOVIEW L19W-9 Commencez Ici page 7

Colour:
This menu lets you select a preset color temperature (6500K,
▼ ▲
9300K, Native) by pressing the OSD buttons or , changes to
the color temperature take immediate effect on screen.
If you wish to set individual color values, select the Custom
Colour option, then press the MENU button to select the red,
green and blue settings and set the desired value using the OSD
∨ ∧
buttons or .The current settings are automatically saved
when you return to the previous level or exit the OSD menu.
OSD Setup:
Language: selects the language for the OSD menu by pressing
▼ ▲
the OSD buttons or .
OSD H- Position: Controls the OSD menu's horizontal position.
OSD V- Position: Controls the OSD menu's vertical position.
OSD Timeout: Determines how long (in seconds) the OSD
menu waits before closing automatically after no action has
been performed.
Advanced:
Input select (optional): Selects input signal (Analogue,
▼ ▲
Digital) by pressing the OSD buttons or , press MENU or
AUTO to confirm the selection.
DDC/CI: There is an optional OSD window(On/Off)
On: active; Off : inactive.
Resolution Notifier: With the function activated (On) a
message appears on the screen approx. 30 seconds if not
the optimum resolution 1280 x 1024 is settled. With the
function is deactivated (Off) no message appears.
Factory recall: Activating the factory settings
MENU: Start AUTO: Back
Information: Displaying monitor data:
monitor name, resolution, the horizontal and vertical
frequency
Note: Do not adjust the screen settings when animation is displayed and make sure to adjust the
settings in full screen mode.