Connecting The Power Adapter(S) - AmazonBasics B081TD1Y3X Manuel D'instructions

Connections

Connecting the power adapter(s)

• This product has two power source inputs. The first source is via USB-C
port for Power Delivery (PD) 3.0 (D). The alternate source is the DC input
socket (E). It requires at least one for the product to work properly.
• Connect the USB Type-C port of a PD power adapter (not included) to
the USB Type-C port of (D) of the product; or connect the DC jack of a DC
power adapter (not included) to the DC input socket (E) of the product.
• Connect the power adapter(s) to socket outlet(s).
NOTICE
• For the DC input socket, use a 20 V
• This product supports 100 W Power Delivery charging for the host
computer and the product's power requirements (15 W).
• With both power sources connected to this product, if the active
power source is unplugged, the alternate one will power the docking
automatically. The connected devices get disconnected for a few seconds
and then reconnect automatically.
• If the product's power relies solely on the host computer, its USB-A and
USB-C ports cannot work.
• This product works with host computers that supports the DisplayPort
Alt Mode (DP Alt Mode) by way of the USB Type-C connector. The host
computer interfaces via the DisplayPort (F), VGA 15-pin socket (H), HDMI
port (G) ports of this product to the corresponding displays.
NOTICE
Risk of data loss! Do not disconnect from a computer or
USB device during data transfer. Doing so may corrupt your data or damage
connected devices.
NOTICE
• A USB 3.0 cable is required for USB 3.0 connections.
• The total output of the 4 USB-A (J and A) and 1 USB-C (C) ports is 12W
(5 V , 2.4 A). The USB port with 1.5 A Charging (A) can deliver up to a
maximum of 7.5 W (5 V
• This product is backward compatible and is designed to work with older
USB versions including USB 2.0 and USB 1.1.
(75 W or above) power adapter.
, 1.5 A).
EN
5