Accessories; Technical Data - YATO YT-84990 Mode D'emploi

TOOL FEATURES
The electric chainsaw sharpener is intended for resharpening of chains used with chainsaws for wood. With a wide adjustment
range, the tool helps sharpen chains easily, safely, and fast. The correct, reliable and safe operation of the tool depends on its
proper use, therefore:
Read and keep this entire manual before the fi rst use of the tool.
The tool supplier shall not be liable for any damage resulting from failure to comply the safety instructions and recommendations
specifi ed in this manual.

ACCESSORIES

The tool is delivered complete, but it still requires some preparation for use. The tool is not supplied with any fasteners required
for fastening the tool to a bench top.

TECHNICAL DATA

Specifi cation
Catalogue No.
Power supply voltage
Power frequency
Rated power
Rated speed
Wheel size
Sharpening angle adjustment range
Protection class
Protection rating
Noise level
- sound pressure L ± K
pA pA
- sound power L ± K
wA wA
Weight
Duty
The declared noise emission values have been measured using the standard test method and can be used to compare one tool
to another. The declared noise emission values can also be used for preliminary exposure assessment.
Warning! Noise emissions during the correct operation of a power tool may diff er from the declared values depending on the
manner in which the tool is used, in particular the type of the workpiece.
Warning! Operator protection measures must be determined based on an approximation of exposure under current conditions
of use. All stages of the work cycle must be taken into account. In addition to the working time, other factors must be taken into
account, such as the time when the tool is switched off and when it is idle.
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and specifi cations provided with this power tool. Failure to do so may
result in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term "power tool" used in warnings applies to all tools driven by power both wired and wireless.
Workplace safety
Keep the workplace well-lit and clean. Disorder and poor lighting can be causes of accidents.
Do not work with power tools in an environment with an increased risk of explosion, containing fl ammable liquids, gases
or vapors. Power tools generate sparks that can ignite dust or fumes.
Children and third persons should not be allowed to enter the workplace. Loss of concentration can result in loss of control.
Electrical safety
The plug of the electric cable must match the power socket. You must not modify the plug in any way. Do not use any
plug adapters with earthed power tools. An unmodifi ed plug that fi ts the outlet reduces the risk of electric shock.
Avoid contact with earthed surfaces such as pipes, radiators and coolers. Grounding the body increases the risk of electric shock.
12
O R I G I N A L
GB
Units
[V AC]
[Hz]
[W]
[min ]
-1
[mm]
[ ]
O
[dB (A)]
[dB (A)]
[kg]
I N S T R U C T I O N S
Value
YT-84990
220 - 240
50
85
5500
108 x 23 x 3.2
±35
II
IP20
63.5 ± 3
76.5 ± 3
1.25
S2, 20 min