Guardian CR5 Manuel D'instructions page 6

English
Labels
1
Class
1
Anchor at or
above dorsal
D-ring
CR5
Self-Retracting Lifeline
ANSI Z359.14-2021
OSHA 1910.140 & 1926.502
Not suitable for leading edge use
Nunca deben usarse en aplicaciones de borde expuesto
2
DO NOT REMOVE LABELS
Type: SRL
Read supplied
instructions
before using. Failure to follow
instructions may result in serious
injury or death. Never modify product.
This product is not repairable.
USE This device is only for use by one
person as a fall arrester. Only make
connections directly to attachment point
on safety harness. Guard against swing-fall
by keeping lifeline vertically overhead. Ensure
that connection to anchorage is secured
properly before use. Avoid lifeline contact
with sharp or abrasive edges and surfaces.
May be used as a component of a PFAS in
HLL applications. Design, installation, and
utilization of HLLs must be supervised
by a Qualified Person. Not suitable for
horizontal use. Competent Person
must calculate fall clearance prior
to use; fall clearance calculations
must include considerations for
swing fall. Clearance numbers
specified based on lifeline
installed vertically overhead
and in-line with worker.
Inspection Date
Initials
Date of First Use
91704-A
| SRL-P
INSPECTION Prior to each use,
check locking (pull sharply to test)
and retraction function. Inspect for
signs of deployment, defects or
damage to housing, lifeline (inspect
full length), connectors, or missing
parts. Refer to instruction manual for
checking snap hook deployment. Ensure
presence and legibility of all labels.
Inspection by Competent Person required
at least every 12 months. Immediately remove
from service in event of failed inspection, or if
unit is subjected to a fall.
Lifeline Material: HMPE Webbing | Length: 6'
User Weight Range (including tools and
equipment) and Maximum Arresting
Distance: ANSI: 130-310 lb - 3'
OSHA: 100-420 lb - 3'
Maximum Arresting Force: 1,350 lb
Average Arresting Force: 1,150 lb
Free Fall: NOT PERMITTED
Minimum Required Fall
Clearance: 100-420 lb - 6' 6"
Service Temp.: -40° to 130° F
Tested in
USA.
Made in
Taiwan.
1
Class 1
Anchor at or above dorsal D-ring
WARNING
Not suitable for leading edge use
CR5
Self-Retracting Lifeline
Failure to follow instructions may result in serious injury or
death. Never modify product. This product is not repairable.
USE This device is only for use
2
by one person as a fall arrester.
Only make connections directly to
attachment point on safety harness.
Part #
Guard against swing-fall by keeping
lifeline vertically overhead. Ensure that
Serial #
connection to anchorage is secured properly
before use. Avoid lifeline contact with sharp
Date of Manufacture:
or abrasive edges and surfaces. May be used
as a component of a PFAS in HLL applications.
Lot #
Design, installation, and utilization of HLLs
must be supervised by a Qualified Person.
Not suitable for horizontal use. Competent
WARNING Read supplied instructions before using. Failure to
Person must calculate fall clearance prior
to use; fall clearance calculations must
follow instructions may result in serious injury or death. Never
include considerations for swing fall.
Clearance numbers specified based on
modify product. This product is not repairable. lifeline installed vertically overhead
and in-line with worker.
Inspection
USE This device is only for use by one person as a fall arrester.
Initials
Only make connections directly to attachment point on safety
harness. Guard against swing-fall by keeping lifeline vertically
overhead. Ensure that connection to anchorage is secured properly
before use. Avoid lifeline contact with sharp or abrasive edges
and surfaces. May be used as a component of a PFAS in HLL
applications. Design, installation, and utilization of HLLs must be
supervised by a Qualified Person. Not suitable for horizontal use.
Competent Person must calculate fall clearance prior to use; fall
clearance calculations must include considerations for swing fall.
Clearance values specified based on lifeline installed vertically
overhead and in-line with worker.
Lifeline Material: HMPE Webbing | Length: 6'
User Weight Range (including tools and equipment) and
Maximum Arresting Distance:
ANSI: 130-310 lb - 3'
OSHA: 100-420 lb - 3'
Maximum Arresting Force: 1,350 lb
Average Arresting Force: 1,150 lb
Maximum Free Fall: Not Permitted
Minimum Required Fall Clearance:
100-420 lb - 6' 6"
Permitted Service Temperature Range:
-40° to 130° F
Type: SRL|SRL-P
INSPECTION Prior to each use, check locking (pull sharply to test)
and retraction function. Inspect for signs of deployment, defects
or damage to housing, lifeline (inspect full length), connectors,
or missing parts. Refer to instruction manual for checking snap
hook deployment. Ensure presence and legibility of all labels.
Inspection by Competent Person required at least every 12 months.
Immediately remove from service in event of failed inspection, or if
unit is subjected to a fall.
Tested in USA.
Made in Taiwan.
6
Part # DOM Lot # Serial #
MM | YYYY
Read supplied instructions before using.
INSPECTION Prior to each use,
check locking (pull sharply to test)
and retraction function. Inspect
for signs of deployment, defects or
damage to housing, lifeline (inspect full
length), connectors, or missing parts.
Refer to instruction manual for checking
snap hook deployment. Ensure presence and
legibility of all labels. Inspection by Competent
Person required at least every 12 months.
Immediately remove from service in event of
failed inspection, or if unit is subjected to a fall.
Lifeline Material: HMPE Webbing
User Weight Range (including tools and
equipment) and Maximum Arresting
Distance: ANSI: 130-310 lb - 3'
OSHA: 100-420 lb - 3'
Maximum Arresting Force: 1,350 lb
Average Arresting Force: 1,150 lb
Free Fall: NOT PERMITTED
Min. Required Fall Clearance:
Date
100-420 lb - 6' 6"
Permitted Service Temp.:
Date of First Use -40° to 130° F
SRL | SRL-P Tested
in USA.
DO NOT
REMOVE
Made in
guardianfall.com
LABELS
Taiwan.
| Length: 6'