LATIN AMERICA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country specific warranty information contained in
the packaging, call the local company or see website for
warranty information.
To register your tool for warranty service visit our website at
www.portercable.com.
WARning lABEl REPlACEMEnT
If your warning labels become illegible or are missing, call
(888) 848-5175 for a free replacement.
4825 Highway 45 North
Jackson, Tennessee 38305
(888) 848-5175
www.portercable.com
BE sURE TO FOllOW sAFETY RUlEs AnD insTRUCTiOns
For assistance with your product, visit our website at www.portercable.com for a list of service centers, or call the
PORTER-CABLE Customer Care Center at (888) 848-5175.
PROBLEM
Unit will not start.
Battery pack will not charge.
Unit shuts off abruptly.
All manuals and user guides at all-guides.com
Troubleshooting Guide
POSSIBLE CAUSE
Battery pack not installed properly
Battery pack not charged.
Internal componets too hot.
Brushes worn out.
Battery pack not inserted into charger.
Charger not plugged in.
Surrounding air temperature too hot
or too cold.
Battery pack has reached its maximum
thermal limit.
Out of charge. (To maximize the life
of the battery pack it is designed
to shut off abruptly when the
charge is depleted.)
English
POSSIBLE SOLUTION
Check battery pack installation
Check battery pack
charging requirements.
Allow tool to cool down.
Have motor replaced by an authorized
PORTER-CABLE service center.
Insert battery pack into charger until
LED illuminates.
Plug charger into a working outlet.
Refer to Important charging notes
for more details.
Move charger and battery pack to
a surrounding air temperature of
above 40 degrees F (4.5°C) or below
105 degrees F (+40.5°C).
Allow battery pack to cool down.
Place on charger and allow to charge.
11