Panasonic TH-50PE8U Guide Rapide page 15

(Continued)
■
Menu list
Menu Item
Surf mode
Language
Clock
Program channel
Input labels
Monitor out
Pixel orbiter
Time
Side bar
Scrolling bar
VIERA Link
Power off link
Power on link
Default speakers
Auto power on
No signal shut-off
No action shut-off
Play SD card
automatically
About
Reset
■
Sub menu list
Menu Item
Surf mode
Set favorite
CC
Caption select
Signal meter
Adjustments/Configurations (alternatives)
Sets the mode to select the channel with Channel up/down button
(All/Favorite/Digital only/Analog only)
•
Favorite: Only channels registered as FAVORITE
Selects the screen menu language
Adjusts the clock
Sets channels
Selects the terminal and label of the external equipment
[Component 1/Component 2/HDMI 1/HDMI 2/Video 1/Video 2]
To prevent howling and image oscillation, stops output of the pictures and audio specified in
this menu. (On/Off)
Prevents "Image retention" with Wobbling. (Automatic/Force)
•
Automatic: Shifts the display image automatically.
•
Force: Shifts the display image every (1/2/3/4) minutes according to what was set in the
"Time" menu.
Sets the time for "Pixel orbiter-Force" setting. (1/2/3/4)
Change the brightness of the side bar (Off/Dark/Mid/Bright) (4:3 mode only)
•
The recommended setting is "Bright" to prevent panel "Image retention".
Press "OK" to start horizontal "Scrolling" on the screen
Controls equipment connected to HDMI terminals (On/Off)
•
"Power off link", "Power on link", and "Default speakers" cannot be selected if "Off" is set.
Sets "Power off link" of HDMI connection equipment (Set/No)
Sets "Power on link" of HDMI connection equipment (Set/No)
Selects the default speakers (TV/Theater)
Turns TV On automatically when the cable box or a connected device is turned On (No/Set)
•
The "Sleep" timer, "On / Off timer", and "First time setup" will not function if "Auto power on"
is set.
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION is
performed for more than 10 minutes. (Set/No)
Note
•
Not in use when setting "Auto power on", "On/Off Timer", "Lock", "SD Mode", or Digital
channel.
•
"No signal shut-off was activated" will be displayed for about 10 seconds when the TV is
turned on for the first time after turning the power off by "No signal shut-off".
•
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
prior to the shut-off.
To conserve energy, the TV automatically turns off when no operation of remote or front panel
key continues for more than 3 hours. (No/Set)
Note
•
Not in use when setting "Auto power on", "On/Off Timer".
•
"No action shut-off was activated" will be displayed for about 10 seconds when the TV is
turned on for the first time after turning the power off by "No action shut off".
•
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
prior to the shut-off.
Set "On" to play back SD cards automatically. (On/Off)
Displays TV version and software license.
Performing Reset will clear all items set with Setup, such as channel settings.
Adjustments/Configurations (alternatives)
Sets the mode to select the channel with Channel up/down button (All/Favorite/Digital only/
Analog only)
Sets favorite channels.
Displays Closed Caption. (Off/On)
Changes the station identifier.
Checks the signal strength if interference or freezing occurs on a digital image.
15