GE 42 Manuel D'utilisation page 22

3/4" FRAMED CUSTOM PANEL OPTION
For a more custom appearance, 3/4" framed custom panels
may be installed on trimmed models. The overlay panel is
secured to a 1/4" finished backer panel. The assembled custom
panel then slides into the trim with the same procedure
described on page 37.
Door
3/4"
Custom
Overlay
Panel
3/4"
1/4"
Backer
Panel
.250 + .750 = 1.000 Maximum Total Panel Thickness
3/4" FULL-WIDTH OVERLAY
CUSTOM PANEL OPTION
This design provides a nearly trimless appearance. The full width
overlay panel covers most of the door trim. In this design, a spacer
panel must be installed between the finished backer and overlay panel.
Custom
Overlay
Panel
Door
1/4"
Backer .10 Inch
Spacer
Panel
.250 + .10 + .750 = 1.100 Maximum Total Panel Thickness
IMPORTANT NOTE: Maximum total weight
is 70 pounds for any assembled Fresh Food
panel, 45 pounds total for the Freezer panels
and 15 pounds for the grille panel.
Installation Instructions
Overlay Panel
Spacer Panel
Backer Panel
NOTE: Left-to-right offset is not equal
to top-to-bottom offset.
22
Overlay Panel
Backer Panel
NOTE: Left-to-right offset is not equal
to top-to-bottom offset.