Télécharger Imprimer la page

Team kalorik TKG VT 2000 Mode D'emploi page 6

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
REPLACING THE BATTERIES
The remote control is powered by a Lithium Button Cell Battery (CR2025). Should the remote
become unresponsive, replace the battery following the instructions below:
1.
Turn over the remote and press tab A to the right.
2.
Slide out the battery tray B
3.
Replace the battery with the same type, ensuring the positive side is facing
upwards.
MAINTENANCE, CLEANING AND STORAGE
ATTENTION: Please shut off the unit and unplug from the mains before cleaning or
performing any maintenance.
Clean the fan with a duster or a soft wet cloth.
Do not use chemical solvents (such as benzene, alcohol or gasoline) as they may
cause irreversible damage. Make sure no water enters the control panel or fan motor
Do not run the unit until completely dry.
Place the fan in its original box or cover the fan to protect it from dust. Store it in a cool
dry place.
TKG VT 2000
ON/OFF : Turns the fan On and Off
SPEED : Cycles between the fan speeds – Quiet, Standard
and Turbo
TIMER : Press repeatedly to set the On timer in 30 minute
intervals. The time set will be displayed on the unit.
SWING : Press to turn the Swing Function On and Off.
AMBIENT LIGHT BUTTONS – WHITE, GREEN, PURPLE AND
BLUE :
Press the appropriate button to turn on the colour of
ambient light required.
Press the same button again to turn off the ambient light.
6

Publicité

loading