Kalorik TKG RAC 1016 Mode D'emploi page 3

Never use accessories that are not recommended by the
❑
producer. They could constitute a danger to the user and risk
to damage the appliance.
Never move the appliance by pulling the cord. Make sure the
❑
cord cannot get caught in any way. Do not wind the cord
around the appliance and do not bend it.
Stand the appliance on a table or flat surface.
❑
Make sure the appliance has cooled down before cleaning
❑
and storing it. Attention: the stone slab keeps the warmth
for a long period.
Make sure the cord never comes into contact with the hot
❑
parts of the appliance.
The temperature of the accessible surfaces may be very high
❑
when the appliance is in use. Do not touch these surfaces but
use the handles.
Make sure the appliance never comes into contact with
❑
inflammable materials, such as curtains, cloth, etc. when it is
in use, as a fire might occur. It is advised to place a heat
resistant coating between your table and the appliance (this
way you don't get burns on your table or table cloth).
Make sure not to scratch the special coating of the pans as
❑
you might get pieces of this coating in the food. Use a
classical wooden spatula or a heat-resistant plastic one.
Unplug the appliance when not in use.
❑
Only cook consumable food.
❑
It is essential to keep the appliance clean as it comes into
❑
contact with food.
Never place this appliance near to a wall. Always provide
❑
proper ventilation all around the appliance when using it.
Your appliance must never be switched on through an
❑
external timer or any kind of separate remote control system.
Please note: Should the symbol
❑
surface, you need to be careful when handling the product.
This symbol means: CAUTION, this surface may get very hot
during use.
be indicated on a certain
3 TKG RAC 1016