Orbis Orus Manuel D'utilisation page 56

To modify the set values, press
the "PRG" key. The parameter
corresponding to the modification
will start flashing. Press the "
and " " keys to modify the values
and " " to confirm.
The settings for both menus are, in
order:
- week of the month
(1ST first, 2ND second, 3RD third,
4TH fourth, LST last)
- day of the week
- month
- changing hour
At the end of each menu, press the " " key again to access
the next menu or to exit and return to the normal view.
The default values set for the automatic time change are:
- winter  summer change: last Sunday of March at 02:00
- summer  winter change: last Sunday of October at 03:00
Telephone activator command
A telephone activator can be connected to the programmable thermostat,
allowing the remote activation/deactivation of the instrument. There are
two possible operation modes:
- open contact  normal operation
- closed contact  the programmable thermostat is in OFF status until new
Note: the OFF command from keypad has priority on the OFF
command from the dial; therefore to command activations
and deactivations with the dial, the programmable
thermostat must not be off.
"
command
- 54 -
Orus Programmable Thermostat User Manual