FONtevo COMpact 4000 Notice D'utilisation page 39

Caution: Electrostatic charges can destroy sensitive components.
• Discharge electrostatic charges from yourself before touching the circuit boards
with your hands or any tools. To do this, touch a preferably earthed metal object, such as
the PBX's earthing terminal or a computer case.
Important: Before you insert a COMpact 2BRI module, first make the necessary port
settings on the module (operating modes and terminators).
Inserting a Module:
1. Slide the module into the board guides with
the component side pointing to the left.
2. Press the module upward until the board
lock clicks into place.
Removing a Module:
1. Unlatch the board lock, for example with
your right thumb.
2. Remove the module with your other hand.
Connecting the PC
Requirements:
• Available network socket on the PC
or in the network of the PC
1. Insert one
accompanying network cable into
the network socket on the PC or in
the network of the PC.
2. Insert the other end of the network
cable into the Ethernet socket on
the COMpact
board.
COMpact 4000 Instructions V04 03/2017
end of the
4000 interface
Commissioning
39