Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EUROPE
YOUR ROLLATOR
13
12
11
10
9
8
7
6
CLEANING/MAINTENANCE/REASSIGNING
Cleaning
Clean and disinfect the rollator regularly. Use mild soapy water with no abrasive additives.
Disinfect the rollator using commercially available products. Never use steam degreasers.
Never use scouring or harmful cleaning agents.
Maintenance
The STELLA rollator requires little maintenance. If the braking function weakens,
wheel movement becomes stiff or you notice any other functional impairment,
please take the rollator to your authorized dealer for servicing. Never use any kind of
lubricant on any parts of the rollator.
Reassigning to a new user
If you pass along your rollator to a new user, please remember to hand over all the
technical documentation needed to ensure safe operation. In accordance with instructions,
the rollator must be inspected, cleaned and returned to pristine condition by an authorized
dealer before assigning to the new user.
6
1. Handle height adjustment
1
2. Armrests (Optional)
3. Removable storage bag
2
4. Footrests (Optional)
3
5. Cane holder (not compatible
with armrests)
4
6. Slow-down brakes (Optional)
7. Brake
8. Folding /unfolding seat strap
9. Cup holder
10. Back strap height adjustment
1 1. Brake handles
12. Ergonomic handgrips
13. Flip-back oversized back strap
5
USING AND ADJUSTING YOUR ROLLATOR
1. UNFOLDING YOUR ROLLATOR
Place the rollator in front of you in the direction of
travel and apply the parking brake.
Pull the seat strap to release the locking
mechanism (when available, the red tag indicates
where to pinch and pull), press the left and right
lateral tubes, on either side of the seat, down
together, until the folding locking mechanism clicks
into place.
2. BRAKE HANDLES
Pull to brake (FIG.1): Pull the brake handle up
to slow down or stop the rollator.
Push to lock (FIG. 2): Push down on the brake
handle to lock the rollator in its position.
FIG. 1
FIG. 2
3. BRAKE ADJUSTMENT
The brake system fitted on this rollator complies
with the manufacturer's quality standards. The
brake system has been adjusted to the best
performance settings. To personalize your settings,
follow instructions below.
You may need to adjust the brake system from
time to time as it will wear out with normal use. To
adjust the braking strength, push the screw housing
downward and turn left or right (Figures 1 & 2).
FIG. 1
FIG. 2
- OWNER'S MANUAL
7
Publicité
Table des Matières
