Safety Precautions; Important - Sylvania ValueLED Dusk to Dawn Installation

Safety Precautions:

Important:

Read carefully before installing the fixture. Retain for future reference.
General:
Upon receipt of the fixture, thoroughly inspect for any freight damage which should be brought to the attention of the delivery carrier. All
models will ship preset at 4000K and 55W with the photocell enabled.
Front View
Installation:
Direct Mounting:
1. Mark and drill the appropriate holes for the fixture screw slots (Figure 1). Lag screws for mounting to wooden surfaces are provided,
for other mounting surfaces use appropriate hardware provided by others.
1. If a different CCT or wattage is required, remove the clear knockout. Slide each switch to the desired setting and replace
the conduit plug securely. (figure 2)
2. Fully tighten bolts, ensuring secure attachment to desired location.
3. If photocell is not needed, please use included cap to cover the photocell.
Figure 1
Figure 3
4070567
Side View
Figure 2
Figure 4
CCT / Wattage
Selectable Switch