Lubrication And Reassembly - Homeright Pro 5.0 Mode D'emploi

Lubrication and Reassembly

Storage Kit Over-Night/Long-Term
1
With the pump disassembled, heavily coat the
pipe cleaner with half of the included petroleum
jelly. Insert into the cylinder, working it around to
ensure the inside is completely coated.
Leave the pipe cleaner in the cylinder and
reattach the pump to gun.
Lubrication and Reassembly for Next Use
1
Lubricate piston and piston spring with oil
(included), 3-in-One oil, or similar, install spring
®
on piston and insert into cylinder housing.
4
Turn upside down. Squeeze a small amount of
oil (included), 3-in-One oil, or similar into the
®
pick-up tube port and the return port.
English
14
C820425D.f_MAN_Pro50-55_EN-FR-ES.indd 14
2
Heavily coat the metal area of the piston and
lightly coat all areas of the atomizer valve with
the remaining petroleum jelly. Place in the plastic
storage bag from the Storage Kit.
2
Insert cylinder housing assembly into the front of
sprayer. Insert cylinder locking knob and tighten.
5
Plug in sprayer and squeeze trigger 3-5 seconds
to lubricate piston with oil and protect the
sprayer from drying and the piston from seizing.
3
Place the bag in the container along with the
piston spring and spray nozzle, and screw
the container to the cylinder housing for safe
keeping during storage.
3
Insert atomizer valve and screw on spray tip.
6
Unplug the sprayer and reinstall the pick-up
tube and container. Store the unit.
www.homeright.com
8/15/11 10:41 AM