Clock & Calendar; Alarm; Radio Volume - Oregon Scientific WR608 Manuel D'utilisation

NOTE The 4 "Unrecognized" messages above will
appear when a new NOAA alert message is created and
broadcasted. The unit will not be able to recognize the
message as it is not in the software database.
CLOCK & CALENDAR
To set the clock:
1. Press and hold MENU to enter setting mode.
2. Press to navigate to "Set Clock", press MENU to
confirm.
3. Press / to change the settings.
4. Press MENU to confirm.
The order of the settings is:
• 12 / 24 hour format, hour, minute, month / day format,
year, month, day and day of the week language
(English, French or Spanish).
NOTE To reach a number quickly, press and hold
NOTE The language selected will also be used for the
NOAA alert messages.

ALARM

The unit has 2 alarms (alarm 1 and 2). They can be used
together or independently. Alarms 1 and 2 have different
sounds so that you can differentiate them. The alarm will
sound for 1 minute unless it is disabled.
All manuals and user guides at all-guides.com
/ .
14
To set the alarm(s):
1. Press and hold MENU to enter setting mode.
2. Press / to navigate to "Set Alarm", press MENU
to confirm.
3. Press / to change the settings.
4. Press MENU to confirm.
The order of the settings is; alarm 1 or 2, hour and minute.
To silence the alarm:
• Press LIGHT / SNOOZE to silence it for 8 minutes
OR
• Press and hold LIGHT / SNOOZE, or press any button
except LIGHT / SNOOZE, to turn the alarm OFF and
activate it again at the same time the next day.
To enable or disable the alarm:
1. Press MENU until you reach alarm 1 or 2 display.
2. Press or to enable or disable the alarm. "-:--"
means disabled.
The alarm icon or will appear on the clock default
display when the alarm is enabled.

RADIO VOLUME

To set the radio volume:
1. In the clock display mode, set the radio to NOAA ON by
pressing NOAA.
2. Press or to adjust the volume. (Maximum volume
is 7 / minimum volume is 1.)