Member's Mark 720-0778A Consignes Pour L'assemblage Et L'utilisation page 15

Step 5: Side Burner Knob Assembly
5a). Locate the small opening on the underside of
the knob, behind the rubber grip and peel the
rubber grip back carefully.
5b). Insert the Allen wrench into the hole and into
the set screw, positioned for tightening.
5c). Insert valve stem into knob and tighten the
set screw. See Fig. 12
Step 6: Battery Assembly
Unscrew the electronic igniter button and
place the battery into the housing with
positive terminal (+) facing outward. Replace
the ignition button after the battery has been
installed. See Fig. 13
Assembly Instruction
Fig. 12
Fig. 13
15
continued