Member's Mark 720-0778A Consignes Pour L'assemblage Et L'utilisation page 10

Assembly Instruction
Tighten all screws on the grill as some screws may have loosened during transit
Step 1: Side Burner Bowl Assembly
Fig.1
1a). Loosen the bottom 2 screws that are
located on the right side panel of the grill. Do
not remove completely. See fig.1
1b). Remove the bottom screw that is located
on the right side control panel. See fig.1
Fig.2
1c). Remove the 3 screws along the top edge
of the side burner bowel. See Fig.2
10