Quick Install Guide; Minimum System Requirements; Package Contents; Physical Installation - D-Link DAP-3662 Guide D'installation

Quick Install Guide

This installation guide provides basic
instructions for installing the DAP-3662
Wireless AC1200 Concurrent Dual Band
Outdoor PoE Access Point on your network.
For additional information about how to use
the Access Point, please see the datasheet
and user manual from the D-Link support
website.
Minimum System
Requirements
Computer with Windows, MAC OS, or Linux-
based operating system, and an Ethernet
adapter installed
- Internet Explorer 7.0, Mozilla Firefox®
version 12.0, Safari 4.0, or Chrome 20.0
or newer

Package Contents

DAP-3662 802.11ac Power over Ethernet
-
(PoE) Access Point
Installation CD-ROM
-
Quick Installation Guide
-
- Mounting kit (Wall/Pole Mount)
- Stainless steel mount base x 1
- Stainless tie back straps x 2
- Wall screw x 4
- Wall plug x4
- Stainless mount screw (hexagonal hole)
x1
Hexagon Socket Spanner
-
D-Link DAP-3662 Quick Install Guide
- Two LAN Port Waterproof Enclosure
- Grounding Wire
If any of the above items are missing, please
contact your reseller.
NOTE no PSU supplied. To power the units use an
D-Link PoE switch or the D-Link DPE-101GI PoE
injector.

Physical Installation

STEP 1: Connect an Ethernet
Cable to the LAN1 (PoE) Port on
the AP.
STEP 2: Mount the AP to a Pole
or Wall
2A: Mounting The DAP-3662 On
A Pole
Pole Mount
Secure mount base to the pole with two
stainless tie back strap sets. Ensure that the
tie back is locked securely.
5