GB
Mini Air Cooler Activejet Selected MKS-600SZ
NOTE:
Before using the device, read the Instruction Manual. We recommend that you keep this manual for future reference.
When operating the device, it is advisable to follow the basic safety rules in order to avoid fire, electric shock and mechanical damage to the body.
Observing the instructions and recommendations contained in the Instruction Manual extends the device's service life.
INTENDED USE:
An air cooler is a device that works like a fan. A fan inside the device distributes a mist made from water in the tank. The cooler the water, the lower
the temperature of the air that comes out of the front of the device. The air cooler additionally humidifies and purifies the air.
SAFETY RULES AND WARNINGS:
1. Make sure that the voltage on the nameplate corresponds to the voltage of the power source.
2. Do not attempt to repair the device yourself.
3. Keep the device work area in order.
4. Keep the device away from moisture and water, explosive and flammable substances and particles. Failure to follow these rules may result
in a fire or electric shock. Excessive dust on the device may lead to overheating of the motor and permanent damage to the device.
5. The use of non-original power cables is prohibited.
6. Take care of the USB cable: do not use it to move the device, pull it or disconnect it from the power supply. Protect the USB cable from heat,
mechanical damage, oil.
7. Do not put your fingers or any objects in the air outlet/inlet grille.
8. The device is not intended for people with limited physical, sensory or mental abilities. Children under the age of 8 and people
with restrictions may use the device only under the supervision of a person responsible for their safety.
9. Do not cover the device with e.g. clothing or other objects that could obstruct free airflow.
10. Do not flip the device upside down.
11. Do not immerse the unit in water or other liquids.
12. Assembly, disassembly, cleaning, and maintenance of the device may only be carried out after unplugging the power cord.
13. Do not leave the switched on device unattended.
14. The device is intended for use indoors, in clean and dust free rooms. Large particles of dust and dirt can shorten the service life of the device.
15. Place the device on a hard, flat surface.
16. Do not move the device when the water tank is full.
17. If water penetrates the device, disconnect the power supply and leave it to dry for 24 hours.
18. Empty the water container and dry the unit before the planned prolonged period of non-use.
TECHNICAL SPECIFICATIONS:
Model: MKS-600SZ
5 V DC, 1A, 6W
Weight: ~1.25 kg
Mini Air Cooler Activejet Selected MKS-600SZ
FEATURES:
1
Water tank
2
fan propeller and rear cover
3
water filter cover
4
housing of the device
5
front cover
6
directional blinds
7
water filter
8
cooling containers
9
USB cable
FILLING THE CONTAINER:
CAUTION: Before filling the container with water, disconnect the device from the power supply. Do not operate the device with wet hands.
Do not use hot water.
Before filling the water container, set up the unit at its destination. For best results, it is recommended to place the air cooler approximately 1.8m
from your personal space. In order to protect the furniture, we recommend that you put a waterproof pad.
1. Pull out the water container
2. Unscrew the safety plug counterclockwise
3. Fill the tank with clean, cool water not exceeding the indicated MAX level. We recommend using distilled water to extend the life of the unit.
4. Turn the plug clockwise. Make sure you don't over tighten.
5. Place the water tank in the device. Make sure it is properly seated.
6. To set the desired air direction, set the directional blinds at the front of the air conditioner casing.
THE USE OF COOLING INSERTS:
The set includes 2 cooling inserts for interchangeable use.
GB