Télécharger Imprimer la page

NEC PX-60SP3U Mode D'emploi page 5

Publicité

Les langues disponibles

Les langues disponibles

Cleaning cabinets
Before cleaning, always be sure to remove the power plug from its socket.
Wipe with a soft, dry cloth with a relatively flat pile.
If soiling is particularly bad, wet the cloth in a mixture of neutral detergent thinned with water, wring the cloth dry, wipe, and
then finish with a dry cloth.
If using a chemically treated cleaning cloth, be sure to follow any and all instructions on its use.
Wiping with a mixture containing benzene, paint thinner, or other volatile materials may result in warping or the peeling of the
cabinet coating.
To remove dust from the speaker mesh protectors, use a vacuum cleaner with a brush adapter.
Note that you should never attempt to clean the speakers by applying a vacuum directly to the speaker mesh protectors or by
using nozzle adaptor.
Scratching the cabinet or the speaker mesh protectors with a fingernail or the application of force using any other hard object
may result in scratching.
Also note that inserting any sharp object into the speaker mesh protectors may result in the opening of holes.
Never apply insecticide or any other volatile materials on the cabinet. Also avoid leaving any rubber or plastic materials
on the cabinet for any extended period of time, as doing so may result in warping or the peeling of the cabinet coating.
Disposing of your used product
EU-wide legislation as implemented in each Member State requires that used electrical and electronic products carry-
ing the mark (left) must be disposed of separately from normal household waste.
This includes plasma monitors and their electrical accessories. When you dispose of such products, please follow the
guidance of your local authority and/or ask the shop where you purchased the product.
After collecting the used products, they are reused and recycled in a proper way. This effort will help us reduce the wastes as well
as the negative impact to the human health and the environment at the minimum level.
The mark on the electrical and electronic products only applies to the current European Union Member States.
Specifications
Description
:
2-way, 3-speaker system (Bass reflex speaker system; Qty: 1)
6 Ω
Impedance
:
Rated input
:
20 W
Maximum input
:
60 W
External dimensions :
90 mm (W) x 880 mm (H) x 96 mm (D)
3.5 in. (W) x 34.6 in. (H) x 3.8 in. (D)
(Not including attachment plates; Qty: 1)
Weight
:
6.8 kg (15.0 lbs) (2 speakers)
Usage environment
Temperature
:
0 °C to 40 °C/32 °F to 104 °F
Humidity
:
20 % to 80 %
Storage environment
Temperature
:
–10 °C to 50 °C/14 °F to 122 °F
Humidity
:
10 % to 90 %
¶ The specifications and/or design of this product may be subject to change at any time without prior notice.
NEC and the NEC logo are registered trademarks of NEC Corporation.
5

Publicité

loading