Hedge Trimmer Safety Warnings - Bestgreen CYHT09B-610 Mode D'emploi

c) Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tool's operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and the
work to be performed. Use of the power tool for operations different from
those intended could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained.

Hedge trimmer safety warnings

Keep all parts of the body away from the cutter blade. Do not remove
-
cut material or hold material to be cut when blades are moving. Make
sure the switch is off when clearing jammed material. A moment of
inattention while operating the hedge trimmer may result in serious personal
injury.
Carry the hedge trimmer by the handle with the cutter blade stopped.
-
When transporting or storing the hedge trimmer always fit the cutting
device cover. Proper handling of the hedge trimmer will reduce possible
personal injury from the cutter blades.
Hold the power tool by insulated gripping surfaces only, because the
-
cutter blade may contact hidden wiring or its own cord. Cutter blades
contacting a "live" wire may make exposed metal parts of the power tool
"live" and could give the operator an electric shock.
Keep cable away from cutting area. During operation the cable may be
-
hidden in shrubs and can be accidentally cut by the blade.
GB
5