Dogtra RR Deluxe Mode D'emploi page 28

ASSEMBLY AND OPERATION
Figure 5. Setting the latch.
2) Place the release lever under the latch roller
bearing.
3) Turn the receiver on. Make sure that the safety
pin has been pulled out.
52
ASSEMBLY AND OPERATION
Figure 6. Remote launcher released.
4) Press the transmitter's left or right launcher
button depending on which jack (left or right)
it's connected to. The remote launcher is
working properly if the bird cradle pops open
like the diagram above.
5) Press the transmitter's beeper button or duck
call button. You'll know it's working properly
if the receiver sound horn emits a loud beep or
quacking sound.
53