PNI IP230T Manuel Utilisateur page 5

Camera preview interface
1. Settings and information
2. Wi-Fi signal strength
3. Speaker activation
4. SD / HD resolution
5. Full screen
6. Screen capture
7. Activate microphone
8. Start recording
9. Playback recordings
10. Pan Tilt camera
11. Motion detectino alarm
Press the [1] icon in the upper
right corner to access the menu
with additional settings such as IR
function settings, WiFi settings,
Motion detection settings, Recording
settings, Device sharing, etc.
Frequent questions and answers
Did you not manage to add the device to the application?
Make sure that the mobile phone is connected to the 2.4 GHz WiFi network
and that you have correctly entered the WiFi password in the application.
Make sure you have activated the Location function on your phone.
If the problem persists, reset the camera and repeat the configuration steps.
Why in the preview interface of the application, the camera does not display
video images?
Check the WiFi signal, if it is low or no signal. You can test the signal level
by moving the camera closer to the router. If the problem persists, reset the
camera and repeat the configuration steps.
User manual - 5