Télécharger Imprimer la page

Swagman SEMI 4.0 Add-On Mode D'assemblage page 2

Publicité

Les langues disponibles

Les langues disponibles

INSTRUCTION SHEET
PRODUCT: 64699 SEMI 4.0 Add-On • Page 2 of 2
10. NOTE: The key is required to lock the mechanism to the lock post.
11. When the rack is not in use the main ratchet arm can be folded down
and secured with wheel strap. The complete rack can be folded up
against the vehicle. Ensure that the cam lever is completely engaged
before driving.
Important Notes:
1. This bicycle rack has been designed to carry 1 or 2 bikes. It can only be
used in a Class 3 or Class 4 hitch.
2. This rack is designed for typical use and applications (on paved or
smooth gravel roads). Do not use this rack on a vehicle that will be
driven on rough roads or where the rack (and bikes) will be subject to
signi cant or constant jarring and/or shock, or any vehicle with very sti
springs that will transfer the load shock directly to the rack and bikes.
3. Proper tting and installation of this carrier to your speci c vehicle is
critical, and is not the manufacturer's responsibility.
4. Improper use of this product may result in damage to your rack, your
vehicle, your bicycles, or even other vehicles driving behind you as a
result of colliding with or trying to avoid fallen bicycles and/or the rack.
5. The purchaser should be aware that the load created by a rack and
bicycles can exceed the maximum rating on the hitch or bumper.
6. Swagman Racks are powder coated to help prevent rust. When leaving
them outside for extended periods of time the nish will lose its luster.
It is recommended that when not in use it is stored indoors.
7. Take care to add padding on any area of the bikes that touches another
bike or any part of the vehicle. Damage can and will happen (to your
bikes and/or to the vehicle) if care is not taken during the loading and
transporting of your bikes, and padding used where necessary.
8. Bicycle tires should be kept at least 6" away from the exhaust pipes of
the vehicle. The high temperature exhaust exiting from the exhaust
pipes is hot enough to melt or damage tires. The bike rack should also
be kept away from the direct exhaust ow.
9. Bikes tted with large accessories (such as a child carrying seat) will
greatly increase the wind resistance and therefore the pressure on
the rack and all vehicle mounting points. Reducing vehicle speed will
reduce the chance of any problems occurring because of this situation.
10. After reading this manual, should you have any additional questions
regarding the compatibility, tting, and/or use of this rack, please
call your nearest Swagman authorized retail dealer or Swagman
Customer Service.
Mounting the bike rack on a Trailer or 5th Wheel:
1. Purchaser is advised that the load created by rack and bicycles will
exceed the strength of trailer or 5th wheel bumper, mounting location
or the bike rack. The rack is not under warranty if mounted in this
location.
ATTN: STATE OF CALIFORNIA CONSUMERS
WARNING: Cancer and Reproductive Harm • www.P65Warnings.ca.gov
300 - 1880 Government St. • Penticton, B.C. Canada V2A 7J1 • Phone (250) 490-8883 • Fax (250) 490-8885 • www.swagman.net
NOTE 1
NOTE 1
male
male
BOLT
5
5
male
male
6
7
8
REV 23/10/19

Publicité

loading

Ce manuel est également adapté pour:

64699