Axis T90D Guide D'installation page 18

AXIS T90D Illuminators
How to change the lens
NO NO NO TICE TICE TICE
Handle the lens with care and do not touch the optical film.
• The pre-mounted lens provides an angle of illumination of 35°.
- To alter to 10° angle, remove the lens.
- To alter to 60° angle, replace with supplied lens.
- To alter to 80° angle, replace with supplied lens.
Lens for 120° angle is available but not included with the product.
All lenses have markings with the angle of illumination.
Important
To maintain the IP66 rating of the illuminator, make sure that the illuminator is correctly
reassembled.
1. Disconnect the power.
2. Remove the screws holding the baseplate using a 2.5 mm allen/hex key.
3. Change to a diversion lens with the desired angle of illumination.
4. Place the baseplate in its original position and fasten the screws using a 2.5 mm
allen/hex key.
5. Point the illuminator towards the cameras field of view.
1
Screws
2
Baseplate
3
Diversion lens
18