Axis T90D Guide D'installation page 15

3. Position the illuminator next to the camera and point the illuminator towards the
cameras field of view.
4. Connect the illuminator to the PSE. For information about the PSE see Power Connector
on Specifications on page 20.
- AC/DC versions
Connect the power cable from the PSE to the illuminator.
- PoE versions
Connect the network cables from the PSE and the illuminator to the IP66 cable
coupler.
Important
To maintain the IP66 rating of the illuminator, make sure that the illuminator is
correctly connected to the PSE.
AXIS T90D Illuminators
15
EN